Mandatory Safety Upgrade - P238

p210, p220, p224, p226, p227, p229, p232, p238, p239, p250, p320, p290rs, p516 pistol, p522 pistol, p556 pistol, p938
User avatar
Site Admin
Posts: 10
Joined: Fri Jan 30, 2015 7:44 pm

Mandatory Safety Upgrade - P238

Postby admin » Fri Nov 20, 2015 3:27 pm


Image source
This does not affect ANY of the 27Axxxxxx or 27Bxxxxx serialized pistols.

Posted July 2009

Dear SIG SAUER Customer:

SIG SAUER, Inc. has initiated a Mandatory Safety Upgrade pertaining to our new Model P238™ pistols. We have determined that a small number of P238 pistols may have safety levers that are not manufactured to factory specifications. Under certain conditions, it may be possible for the lever not to be completely engaged in the safe position. In this condition, the gun will not fire when the trigger is pulled. However, when the safety lever is moved to the off position, the hammer may fall, with the remote possibility that the gun could fire unintentionally, thus creating a risk of injury or death.

There have been no reports of any injuries or mishaps; however, in accordance with SIG SAUER, Inc.’s commitment to provide customers with the highest quality products and services, we are issuing a P238 Mandatory Safety Upgrade, to return the identified product to factory specifications. Upon receipt of the firearm, SIG SAUER will, at no cost to the owner, eliminate the risk identified above by replacing the subject part and performing functional upgrades that have been incorporated into the P238, subsequent to its introduction. SIG SAUER will return the firearm, pre-paid, to the owner as quickly as possible.

If you have a SIG SAUER P238 with a serial number between DA000501 and DA003216, please cease use of the firearm immediately. Not all P238s within the identified serial number range are affected; therefore, it is imperative that you contact us. An operator will take your information and confirm if your firearm is required to be returned for Upgrading.

Available M-F 8:30am - 6pm (EST)
End-users and consumers may call the SIG SAUER CUSTOMER SERVICE department at 603-418-8102.
Dealers and distributors should call the SIG SAUER DEALER SERVICE department at 603-418-8136 or 603-418-8180.

This does not affect ANY of the 27Axxxxxx or 27Bxxxxx serialized pistols.

We apologize for any inconvenience and appreciate your immediate cooperation in the return of your P238 handgun.


User avatar
Posts: 1
Joined: Sun Aug 07, 2016 1:15 pm

Re: Mandatory Safety Upgrade - P238

Postby zerothree76 » Mon Aug 08, 2016 1:38 pm

Well crap. I better go check my serial number.

Return to “Sig P-Series” is a Sig Sauer enthusiast forum, and is in no way affiliated with nor represent Sig Sauer, Inc.
The Sig logo and Sig Sauer name are registered trademarks of Sig Sauer, Inc.
Powered by phpBB® Forum Software © phpBB Limited